LANLINK 900:Point to Multipoint Lan Extender/IP-Based Facility Controller

Point to Multipoint LAN Extender/IP-Based Facility Controller

Specifications Brochure Quick-Setup Guide

Extending Ethernet to the Transmitter Site
Examining the benefits of a promising new trend

Long Range- Up to 30 Miles

Deploy Today- License Free

Plug and Play- Configuration requires virtually no setup

Secure-Multiple security levels preventing unauthorized access

No Path Surveys-With a working 950 MHz link, we guarantee this will work

Easy to Install-Duplexer allows easy RF connections to existing antenna and line infrastructure

Future Proof- Broadcast and professional audio products will all soon be TCP/IP capable

Built-in Functionality- Options for audio/video codec, IP-based remote control, Video Cameras and Protocol Converters currently in development

Network Management- SNMP/Web Server

The LANLINK 900 is a long range high speed industrial wireless IP/Ethernet/IP Facility Controller solution designed for by a company with it’s roots in broadcasting for over 40 years. It allows broadcasters to take advantage for existing 950 MHz aural STL antenna infrastructure and bring LAN connectivity along with two RS-232 data circuits between a single Studio and multiple Transmitter/Studio Sites. The LANLINK connects remote controls, audio codecs for back-up STL, and can provide audio/video connectivity.

The LANLINK 900 uses advanced 900 MHz FHSS technology for license-free operation in the 902-928 MHz ISM band. It is capable of up to a 30 mile range and

up to 512 kbps data rater for IP/Ethernet connections. Two RS-232 that can be set between 1200-115,200 bps offer additional utility.

Installation is simple and straight forward with industry standard RS-232 9 Pin Ds and RJ-45 connectors for external devices. RF connections are made to a duplexer designed to accommodate both the LANLINK 900 and current 950 MHz STLs.

Integrated options include IP-based remote controls, audio/video codecs, silence detectors, and protocol converters for interfacing with legacy serial devices.

Specifications

TRANSMITTER
GENERAL
Configurations:	Access Point/Remote Dual Gateway Remote Ethernet Gateway
Frequency Bands:	902-928 MHz ISM band
Data Rate:	512/256 Kbps user configurable air link; 1,200-115,200 bps serial ports
Spreading Mode:	Frequency Hopping Spread Spectrum
Coverage Range:	Up to 30 mi. (40 Km.)
Network Mgmt:	HTTP (embedded web server) SNMPv1, MIB II, Enterprise MIB
Agency Approvals:	FCC Part 15 approved
Carrier Power:	0.1 to 1 watt (20 to 30 dBm)
Modulation:	CPFSK (Continuous Phase FSK)
RECEIVER
Sensitivity:	-92 dBm @ 512 Kbps with 10-6 BER; -100 dBm @ 256 Kbps with 10-6 BER
INTERFACES
Ethernet Port:	10BaseT, RJ-45
Serial Ports:	RS-232/V.24, DB-9F, DCE; RS-232/V.24, DB-9M, DCE/DTE
PROTOCOLS
Wireless:	CSMA/CA Wireless Protocol with Collision Avoidance
Ethernet:	IEEE 802.3; Spanning Tree (Bridging); IP (DHCP, ICMP, UDP, TCP, ARP)
Serial:	Clear channel mode for serial async
Alarm/Control:	4 Digital Inputs; 4 Digital Outputs; 4 Analog Inputs / Outputs
Protocols Supported:	Moseley MRC-2, MRC1620; Other Transmitters on request
INTEGRATED FACILITY CONTROLLER
Optional modules for command, telemetry and statics interfaces in multiples of 16 and DB37 compatible with existing MRC-2 installations OPTIONAL MODULES
Moseley’s 4 Port Mux – 10/100Mbit interface; Moseley Digital Audio/Video codec – Voice over IP, Video over IP

Please e-mail info@moseleysb.com or
call (805) 968-9621 for further assistance

Specifications herein subject to change without notice

* You must have the Adobe^® Acrobat^® viewer
for the PDF brochure.